HOWO NX 6×4 Dump Truck

SINOTRUK HOWO NX 6×4 dump truck for short-distance transport of aggregate, earth, and mining materials. The model and drive configuration are provisional. Confirm the model using the vehicle nameplate and identification documents, and verify the drive configuration on the actual vehicle. The source-listed China National III SINOTRUK engine, SINOTRUK manual transmission, leaf-spring suspension, 12R22.5 tyres, 300 L fuel tank, 5.6 m cargo body, and H77L cab are all subject to verification; inspection status must be checked against actual records.

Description

The HOWO NX 6×4 dump truck is intended for construction transport. Potential applications include short-haul transfers at aggregate yards, mine overburden and ore transport, infrastructure earthworks and backfilling, coal and mineral transfers, agricultural water-conservancy projects, and site clearance. It may be used in construction, mining, sand and aggregate, and municipal engineering. The original folder, title, and most of the body text use the HOWO NX name, so this product is provisionally described as a HOWO NX 6×4 dump truck. The model and drive configuration are provisional. Confirm the model using the vehicle nameplate and identification documents, and verify the drive configuration on the actual vehicle. The source also refers to the Haohan N7; this does not establish that the two names refer to the same specific model. The complete-vehicle nameplate, approved model designation, or chassis documentation must be checked.

The original materials identify the power unit as a SINOTRUK diesel engine with China National III emissions, and the transmission as a SINOTRUK manual transmission. These configurations, including their brands, models, and emissions level, are all subject to verification; the engine nameplate, emissions documents, and complete-vehicle configuration sheet should be used for confirmation. The engine and transmission can be matched to the confirmed vehicle's load and operating conditions. Actual power, low-speed torque, fuel requirements, parts availability, and maintenance costs depend on the specific configuration and conditions of use. Fuel should comply with the engine manufacturer's requirements; suitability for fuels of differing quality should not be judged solely from the model name.

The original materials specify a 6×4 three-axle chassis layout, with a steering front axle, two driven rear axles, and leaf-spring suspension; 12R22.5 tyres; a 300 L fuel tank; and a 5.6 m cargo-body length. These drive-layout, suspension, tyre, fuel-tank, and cargo-body details are provisional source-listed configurations and must be verified against the vehicle nameplate or by measurement. The measurement basis for the cargo-body length—whether internal or external—also requires confirmation. The body may be used to transport bulk materials such as crushed stone, sand, earth, and coal gangue. Reinforcement of the body, the hydraulic hoisting arrangement, and its load capacity must be confirmed against the actual vehicle and formal configuration sheet. Do not load beyond the rated limit.

The original materials state that the vehicle is equipped with an H77L cab. SINOTRUK HOWO-NX series materials list an H77L cab, but that does not confirm that this vehicle has that configuration. The cab model is provisional and must be verified against the vehicle nameplate or actual vehicle configuration. Cab visibility, seating, and control layout must be checked on the actual vehicle. Factory and pre-delivery inspections should cover items such as powertrain operation, braking performance, hydraulic hoisting, lights and electrical systems, tyre pressure, and fluid levels. Whether these checks have been completed and whether the onboard tools and documents are complete must be verified against the delivery records. Whether the vehicle is ready for immediate operation also depends on its actual condition and local regulations.

Depending on the customer's project requirements, consult about optional accessories and customization, such as an environmental cover for the cargo body, wear-resistant liners, an auxiliary fuel tank, and a reversing camera. Confirm the scope of export customs-clearance documents and equipment operation and maintenance guidance. Dump-truck performance figures, optional accessories, and applicable requirements are subject to the formal documentation for the corresponding model and the configuration agreed by both parties. Catalogue photographs are for product identification and do not mean that all pictured vehicles have exactly the same configuration.

Product Specifications

Attribute Specification
Product model and drive configuration HOWO NX 6×4 dump truck; provisional. Confirm the model using the vehicle nameplate and identification documents, and verify the drive configuration on the actual vehicle.
Engine and emissions SINOTRUK diesel engine, China National III emissions; source-listed and provisional, to be verified against the vehicle nameplate and formal documents
Transmission SINOTRUK manual transmission; source-listed and provisional, to be verified against the vehicle nameplate or formal configuration documents
Chassis layout and drive 6×4 three-axle layout, steering front axle and two driven rear axles; source-listed and provisional, to be verified against the vehicle nameplate or actual vehicle
Suspension Leaf-spring suspension; source-listed and provisional, to be verified against the actual vehicle or configuration sheet
Tyre specification 12R22.5; source-listed and provisional, to be verified against the actual vehicle or configuration sheet
Fuel tank capacity 300 L; source-listed and provisional, to be verified against the actual vehicle or configuration sheet
Cargo-body length 5.6 m; source-listed and provisional, to be verified by measurement; internal or external measurement basis is unconfirmed
Cab model H77L; source-listed and provisional, to be verified against the vehicle nameplate or actual vehicle configuration

The HOWO NX 6×4 dump truck is provisionally presented as a heavy-duty construction dump truck for general earthworks and short-distance transport of aggregate and mineral materials. The model and drive configuration in the original materials are provisional. Confirm the model using the vehicle nameplate and identification documents, and verify the drive configuration on the actual vehicle. The approved model designation, chassis model, vehicle identification number, and product series must be checked against the complete-vehicle nameplate and formal configuration documentation.

Power and transmission: The original materials list a SINOTRUK diesel engine, China National III emissions, and a SINOTRUK manual transmission. These details are provisional and must be verified against the vehicle nameplate or relevant formal documents. The engine manufacturer, model, displacement, rated power, emissions level, transmission model, and number of gears are all to be confirmed; specifications from another model's catalogue must not be transferred to this vehicle. Fuel requirements, power performance, and maintenance conditions are subject to the specific engine documentation and actual operating conditions.

Chassis and body: The original materials list a 6×4 three-axle layout, with a steering front axle, two driven rear axles, and leaf-spring suspension; 12R22.5 tyres; a 300 L fuel tank; and a 5.6 m cargo-body length. These configurations and figures are provisional and must be verified against the vehicle nameplate or by measurement. Axle model, suspension type, tyre specification, and fuel-tank capacity must be checked against the actual vehicle or configuration sheet. Cargo-body length, width, and height, as well as the measurement basis for length, must be measured; geometric volume must be determined from measured internal body dimensions. Body stiffeners, plate thickness, hoisting method, and rated payload are all to be confirmed and should not be judged solely from appearance or series name.

Cab and delivery: The original materials list an H77L cab. This model appears in SINOTRUK HOWO-NX series materials, but whether this vehicle has that cab is provisional and must be verified against the vehicle nameplate or actual configuration. The source also refers to the Haohan series; this is not treated as confirmed model attribution. Factory and pre-delivery inspection records for the powertrain, brakes, hydraulic hoisting, lights and electrical systems, tyres, and fluids should be checked. The complete vehicle's condition and the operating condition of its major assemblies must be confirmed by on-site inspection. Accessories such as an environmental cargo-body cover, wear-resistant liners, an auxiliary fuel tank, a reversing camera and radar, a spare tyre, and onboard tools may be confirmed subject to actual supply capability and the agreement between the parties.

Application requirements: The vehicle may be used for short-distance transport of aggregate, earth, coal, minerals, and construction materials, subject to the vehicle's rated payload and road conditions. If confirmed to be a China National III emissions vehicle, it may be subject to restrictions on registration, access to urban areas, or road use in some regions; actual requirements are governed by local regulations. The driver must hold the locally applicable licence class and driving qualification. Performance figures, optional accessories, and applicable requirements are subject to the formal documentation for the corresponding model, vehicle nameplate, measured results, and configuration agreed by both parties. Catalogue photographs do not mean that all pictured vehicles have exactly the same configuration.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “HOWO NX 6×4 Dump Truck”

Your email address will not be published. Required fields are marked *