HOWO 6×4 Truck Mounted Crane
The HOWO7 6×4 truck-mounted crane combines lifting and cargo transport for infrastructure, municipal, and building-material transfer applications. The source table labels it as having a 12-ton-class crane, 371 hp, and China National II emissions; the crane capacity and engine configuration are to be confirmed.
The HOWO7 6×4 truck-mounted crane is a dedicated engineering vehicle combining lifting operations with cargo transport. It is suitable for applications such as loading and unloading building materials at infrastructure construction sites, municipal facility maintenance, relocation of small equipment, and cargo transfer at building-material markets. Built on a heavy-duty truck chassis and equipped with a crane and cargo body, it can combine lifting and transport operations to meet the work requirements of construction teams, building-material operators, and municipal maintenance organizations.
The source table labels the HOWO7 6×4 truck-mounted crane as being equipped with a 371 hp diesel engine and compliant with China National II emissions. The engine model, rated power, and emissions standard are all to be confirmed; refer to this vehicle’s engine identification plate, chassis documentation, and relevant certification documents. The source table also lists a heavy-duty manual transmission, heavy-duty axles (the source term is ambiguous; actual axle construction is to be verified), and reinforced multi-leaf spring suspension; the actual configuration is subject to the vehicle and chassis documentation. The vehicle can be used at construction sites or on suburban roads; its suitability depends on road conditions, load, and vehicle configuration.
The source table identifies the superstructure as having a 12-ton-class crane. The crane make and model, maximum rated lifting capacity, and applicable operating conditions are to be confirmed. This figure must not be interpreted as the permitted lifting load at all working radii, nor is it equivalent to the vehicle’s rated payload. The crane can perform slewing, luffing, and telescoping operations; its specific functions and operating range are subject to the actual vehicle configuration and crane manual. The vehicle is equipped with a cargo body for transporting building materials, tools, and engineering supplies. The source table gives the cargo-body internal dimensions as “65002300800mm”; using the common length × width × height notation, this may provisionally be parsed as 6500 × 2300 × 800 mm. This is a reference interpretation and provisional value only; the actual dimensions must be confirmed from the vehicle identification plate or by measurement, and these figures cannot yet be treated as confirmed specifications for this vehicle. The cargo body and crane use a reinforced structural design and are equipped with hydraulic outriggers. Before lifting, deploy the outriggers in accordance with the crane manual and confirm the ground’s load-bearing capacity. Operating loads must comply with the crane load chart for the applicable working radius.
Before delivery, items such as chassis performance inspection, crane load testing, and hydraulic-system commissioning are subject to the factory inspection records and delivery agreement. Adjustments to crane tonnage, cargo-body dimensions, and auxiliary equipment may be discussed to suit actual operating requirements. Vehicle performance figures, optional accessories, and applicable requirements are subject to the formal documentation for the corresponding model and the configuration confirmed by both parties. Catalogue photographs are for product identification and do not indicate that all pictured vehicles have exactly the same configuration.
Product Specifications
| Attribute | Specification |
|---|---|
| Series/cab-chassis | HOWO7 series cab-chassis, as listed in the source table; to be confirmed against the actual chassis documentation. |
| Axle configuration | 6×4, dual rear drive axles, as listed in the source table; to be confirmed against the actual chassis. |
| Engine | In-line six-cylinder, four-stroke, water-cooled, turbocharged and intercooled diesel engine, as listed in the source table; engine model and actual configuration to be confirmed from the vehicle’s chassis documentation and engine identification plate. |
| Rated engine power | 371 hp, as listed in the source table; provisional and to be confirmed from the vehicle’s engine identification plate and relevant documentation. |
| Emissions standard | China National II, as listed in the source table; provisional and to be confirmed from the relevant certification documents. |
| Transmission | Heavy-duty manual transmission, as listed in the source table; model, number of gears, and actual configuration to be confirmed. |
| Axles | Heavy-duty drive axles (source terminology and construction unconfirmed), a forged or pressed steering front axle, and two-stage reduction rear axles, as listed in the source table; configuration to be confirmed against the chassis model and actual vehicle. |
| Suspension | Reinforced multi-leaf steel spring suspension with a stabilizer bar, as listed in the source table; configuration to be confirmed against the chassis model and actual vehicle. |
| Tyres | 12R22.5 heavy-duty radial tyres, as listed in the source table; configuration to be confirmed against the chassis model and actual vehicle. |
| Fuel tank | Fuel tank listed in the source table; actual configuration to be confirmed against the chassis model and vehicle. |
| Crane | 12-ton-class hydraulic crane, as listed in the source table; provisional. Crane model and maximum rated lifting capacity are to be confirmed. The 12-ton-class label is not a confirmed allowable load for all operating conditions and is not the vehicle’s rated payload. |
| Crane functions | Slewing, telescoping, luffing, and lifting, as listed in the source table; actual functions and configuration to be confirmed against the vehicle and crane documentation. |
| Crane operating parameters | Slewing angle, working radius, lifting height, and outrigger number and configuration are to be confirmed; consult the actual crane load chart for lifting capacity at the applicable working radius. |
| Cargo-body internal dimensions | Source entry: “65002300800mm”; provisionally interpreted using the common length × width × height notation as 6500 × 2300 × 800 mm. This is an unverified reference interpretation, not a confirmed vehicle-specific measurement; confirm from the vehicle identification plate or by measurement. |
| Cargo body | Welded steel-plate construction, as listed in the source table; steel grade, thickness, and actual permitted load are to be confirmed from the actual vehicle and whole-vehicle documentation. |
| Hydraulic equipment | Hydraulic outriggers and hydraulic components are listed; actual components and operating configuration are to be confirmed against the vehicle. Operate in accordance with the crane manual. |
The source table lists the HOWO7 6×4 truck-mounted crane as using a HOWO7-series cab-chassis and being equipped with an in-line six-cylinder, four-stroke, water-cooled, turbocharged and intercooled diesel engine rated at 371 hp, with China National II emissions. The engine model, construction, rated power, and emissions standard are all to be confirmed; refer to this vehicle’s chassis documentation, engine identification plate, and relevant certification documents. The source table records a heavy-duty manual transmission; its specific model, number of gears, and configuration are to be confirmed.
The source table records a 6×4 dual rear drive axle layout, with heavy-duty drive axles (source terminology and construction unconfirmed), a forged or pressed steering front axle, and two-stage reduction rear axles. It lists reinforced multi-leaf steel spring suspension with a stabilizer bar, 12R22.5 heavy-duty radial tyres, and a fuel tank. These axle, suspension, tyre, and fuel-tank configurations must be verified against the chassis model and actual vehicle. Cargo capacity is subject to the whole-vehicle identification plate and compliance documents.
The source table lists a 12-ton-class hydraulic crane for the superstructure, with slewing, telescoping, luffing, and lifting functions, and hydraulic outriggers. The crane model, maximum rated lifting capacity, slewing angle, working radius, lifting height, and number and configuration of outriggers are all to be confirmed. For lifting, consult the crane load chart for the actual working radius. Do not treat 12 tons as the allowable lifting load under every operating condition or as the vehicle’s rated payload.
The source table gives the cargo-body internal dimensions as “65002300800mm”; using the common length × width × height notation, this is provisionally parsed as 6500 × 2300 × 800 mm. This is a reference interpretation and provisional value only; confirm the actual dimensions from the vehicle identification plate or by measurement. This parsed value is not a verified measurement of the actual vehicle. The source table states that the cargo body has welded steel-plate construction and can be used to carry building materials, equipment, and engineering supplies; steel grade, thickness, and actual permitted load are subject to the actual vehicle and whole-vehicle documentation. Hydraulic components and specific operating configurations are subject to the actual vehicle. Follow the crane manual when operating.

Reviews
There are no reviews yet.